![]() |
|
|
|
porsher
|
electrical, circuit identification
Can anyone tell me the circuits served by the following connectors:
A black/yellow brown/white (2) brown/black (2) B Grey/green White/green Black/blue C White/black White/green White Black Blue Thanks! ![]() This is an 86 and we are looking down between the fuse panel and the brake servo.
__________________
86 911 Race Car, with a few 993 bits in the boiler room 79 928 Race Car 88 928 Becoming a Race Car |
||
![]() |
|
83 911 Production Cab #10
|
Does not look like factory connection.
__________________
Who Will Live... Will See ![]() ![]() ![]() 83 911 Production Cab #10, Slightly Modified: Unslanted, 3.2, PMO EFI, TECgt, CE 911 CAM Sync / Pulley / Wires, SSI, Dansk Sport 2/2, 17" Euromeister, CKO GT3 Seats, Going SOK Super Charger |
||
![]() |
|
Registered
Join Date: Jun 2009
Location: Manhattan Beach, California. Factory Delivery-Original owner-Retired engineer
Posts: 5,238
|
Connectors.
Quote:
![]() ^^^^^ Here's my best shot. Maybe someone else will chime in. Hope this helps. pm me as needed. Best, Gerry
__________________
1986 911 Targa. Per Road and Track magazine: Only in L.A.: In the window of a bar in Hermosa Beach, California. "Happy Hour prices during all car chases." Last edited by 86 911 Targa; 07-04-2015 at 04:02 PM.. |
||
![]() |
|
porsher
|
Quote:
I disconnected everything and then checked to see if any functionality was lost. Happily nothing stopped working. This is a race car so it only has the essential lights, instruments, DME etc. The powered seats, ac, interior lights etc are long gone. Job done.
__________________
86 911 Race Car, with a few 993 bits in the boiler room 79 928 Race Car 88 928 Becoming a Race Car |
||
![]() |
|