![]() |
|
|
|
Registered
Join Date: Dec 2013
Posts: 178
|
3.0 valve cover studs
Anyone know the length of the M8 valve cover stud on a 3.0?
I know, I could pull another out or measure the length of this one but I'm not at my garage. Like to pick one up tomorrow. Thanks |
||
![]() |
|
cycling has-been
Join Date: Sep 2004
Location: Jersey Shore
Posts: 7,238
|
51 mm
pn 999 062 010 02 (M8x135) Bill K
__________________
73 911T MFI, 76 912E, 77 Turbo Carrera Last edited by bkreigsr; 08-06-2015 at 05:27 AM.. |
||
![]() |
|
Schleprock
Join Date: Sep 2000
Location: Frankfort IL USA
Posts: 16,639
|
51mm is the overall length. Porsche measures/specifies them differently in the parts diagrams. The inner anchor length is omitted and they state that the outer length to fasten the valve cover is 28mm on the upper/intake valve covers and 35mm on the lower/exhaust valve covers.
__________________
Kevin L '86 Carrera "Larry" Last edited by KTL; 08-06-2015 at 09:00 AM.. Reason: provided lengths for upper vs. lower valve covers |
||
![]() |
|
Registered
Join Date: Dec 2013
Posts: 178
|
Thanks a bunch. Appreciate your help.
|
||
![]() |
|