Help Identifying a decklid

[Philip P]

So... I recently came across a very nice 3.8RS decklid. Aftermarket but great quality. Really impressed with how nice it is.

Unfortunately I have no idea to tell which 911 it will fit.

I have a 930 and was hoping that it would go on there but it could be for a 964 or 993.

Any way I can get some help figuring out if it fits?

I measure from bolt hole to bolt hole as well as from first bolt hole to bump stop.

I also measure from the hinge.

But its hard to get accurate measurements on my 930 with all the brackets and hinges in place.

So was hoping for an easier solution?

Thanks

[Philip P]

The reason why I bought it unidentified is because it was really cheap. And I figure if I don't need it someone else here would take it.

[Fly911]

The deck lids for all 911's 1965 to 1989 and 964's from 1989 to 1994 are all the same size and shape, and are interchangeable. The 964 deck lid with electrical spoiler has different hinges. The 993 deck lid is shorter than the previous models, due to the higher situated rear bumper. So if the 3.8RS came from a 964, it will fit all 1965 to 1994 911's and 964's, and if the 3.8RS lid came from a 993, it will only fit 993. So a 964 3.8RS lid will fit your 930, but make sure the intercooler clears the top of the lid!

[juanbenae]

picture is worth a thousand words...

[onboost]

Originally Posted by Philip P

So... I recently came across a very nice 3.8RS decklid. Aftermarket but great quality. Really impressed with how nice it is.

Any way I can get some help figuring out if it fits?


So was hoping for an easier solution?

Thanks

Yep.. posting some pictures would be a hell-of-a start!!

Post pics of both the top and bottom side

[Philip P]

Thanks for all the help! I should have posted pictures and apologize but finally got the explanation. Fly911 thanks for the info!