Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Join Date: Apr 2004
Location: Riverside
Posts: 627
Heater Flapper Box Identification.

I have one pair of flappers that look like the reproductions being sold. The others have a coil spring thermostat that activates the movement of the flap. PET shows one part number from 1965 on but I suspect the ones with springs were SWB and Porsche changed the design to the later one. The coil spring ones had heavy rust and one housing is very thin in the area around the vent holes. They were disassembled and soaked in Evapo-Rust. Not all parts are shown in the picture. The other pair are dirty but in very good condition. I do not need them and if some one needs these for an original restoration I will be glad to part with them.
Any information is welcome.

Old 06-26-2016, 08:34 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply


 


All times are GMT -8. The time now is 03:54 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.