|
|
|
|
| Author |
|
|
Registered
Join Date: Feb 2001
Location: Tampa Bay Area, FL
Posts: 880
|
Signal Relay and Fan Housing Question
Morning everyone!
Well, I got up at 6am this morning, and removed the fan, housing and alternator. It wasn't a walk in the park, but it's all apart. While I have it apart, I have some questions relating to my work: 1. Is it OK to bead blast the magnesium fan housing? I'd like to remove the old paint, but don't want to harm the magnesium. 2. I've had this strange issue of my turn signal indicators glowing after I start the car. After a while, the glow will go away. I've checked all my grounds, and everything seems to be in order. Is it possible for the turn signal relay to cause something like this? Thanks! ------------------ Michael '78 911SC Euro |
||
10-15-2001, 06:43 AM
|
|
|
Registered
Join Date: Mar 2001
Location: Marysville Wa.
Posts: 22,431
|
bead blast and clear coat looks good. magnesium darkens quickly when left uncoated.
the TS relay usually causes the glowing light problem. |
||
|
10-15-2001, 07:06 AM
|
|
