Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools
Author
Thread Post New Thread    Reply
Registered User
 
Join Date: Aug 2015
Location: Sweden, Gothenburg
Posts: 3
Garage
Warning (Rocky) Gabriel In 1750 ALFA CARBURETORS Parts Store

Warning!!!!!!!!!!!I have shopped with (Rocky) Gabriel In 1750 ALFA CARBURETORS Parts Store, many years and have been pleased with this!
But problems began last spring when I asked him to do a small job with my carburetor!
I've never been so humiliated!

I asked honnom replace the bushings, shafts and trottle plates on my carbs
and the same on thi other two carbs except that I wanted to have them drilled to 42 mm, for 120EUR / Pair........................
And when the agreed price was accepted, I sent the carburetors to him!
He had plenty of time over four months to do this...................
When it all began, he asked several times what he would do with them.
I sent good information about this several times on email with pichtures!!!! but hi asked me again what to do!!!???
Okay When it starts to an end, he began to drive up the price of 400 EUR in total, then he would have been 450 EUR ............ I paid this ...For I know this does not feel good............ ..

The first thing I established was that the throttle shafts were jamming, they stuck in the same position that they were placed on the 40mm Tin carbs.The screws that hold the throttle plates were not tightened and not locked in any way!!! ???

And on thi 42mm Carbs
The throttle plates (butterflies) do not cover the first progression holes in the closed position like they should. In one of the carburetor house, The other carburetor house were you can see three progressions holes in the first throttle plates, and in the other throttle plates you can only see half of a progressions holes, they are crooked and nothing lines up correctly.
The screws that hold the throttle plates were not tightened and not locked in any way!!! ???
Okay.....
J send him a letter about this and he answered me:
Mail 1:
"Ok.i already noticed that you only know how to treat people like ass holes.
Besides being disappointed of everything what else are you able to tell me.
WHAT THE **** IS THERE TO BE DISAPPOINTED ABOUT????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ????????????
Rocky Srl
Via Canalazzi 75
Corlo,Ferrara 44123
Tel: +39 3403586934
Web site: Carburatori Italia - WEBER - DELL’ORTO - SOLEX - Rivendita e riparazione carburatori Weber, Dell'orto, Solex e ricambistica
p-iva:IT01571080389

Mail 2:
YOU SHOULD BE ASHAMED OF YOURSELF,DEAR SIR.
I CHARGED YOU 450 EURO WITH PARTS.
THATS 400 FOR THE JOB +SHIPPING COSTS OF 80 EURO (CHECK WITH YOUR BIG EYES WHAT UPS CHARGES).
320 EURO FOR SUCH A JOB AND YOU CALL ME A THIEFT.LOOK AT THE MIRROR AND BE ASHAMED OF YOURSELF.
SEND THE CARBURETORS TO PEOPLE THAT LIVE OFF THIS JOB AND WHAT DO YOU EXPECT THEM TO TELL YOU THAT EVERYTHING IS GREAT SO YOU DONT GIVE THEM WORK???????????????????????
ARE YOU PULLING ME OFF.DO YOU THINK YOU ARE TALKING TO AN IDIOT§???????????????????????????????
PUT THOSE ****ING CARBURETORS ON THE ENGINE AND YOU WILL SEE HOW IT RUNS PERFECTLY.
DONT EVER COME BACK HERE AGAIN,SIR.
Rocky Srl

So please respon to me about this .............................


Essgee

Old 09-17-2016, 02:22 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply


 


All times are GMT -8. The time now is 04:01 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.