Power Window Switch Relocation
 

I noticed in the car below, they appear to have relocated the power window switches from the driver's door to the center of their custom dash. I thought this was pretty cool - especially on a car with a speaker delete, since no wires at all would need to be passed into the door.

Has anyone else done this? Am I missing anything?

http://thecharisculture.com/assets/T...carshow-48.jpg

Pretty simple. Just trace back and rewire.

Sent from my Nexus 6P using Tapatalk

You still need wires run in each of the doors to the window motors.

Tru dat

Sent from my Nexus 6P using Tapatalk

LOL, knew there was a catch!

Batteries and a remote... too much maintenance.
Contacts on the door and frame that make up on door closure, ultra cool! :)

Actually I am pretty sure there are circular connectors in the frunk near the hood hinges for the windows. You can disconnect the door wires there and reroute the switch wires.

If I were gonna go through the trouble to run wires for window switches, I would use standard rockers instead of the delicate and pricey Porsche switches and wire it so that there were exactly two independent switches, instead of the weird three-switch stock setup.

Agreed = the original switches kinda suck.