Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   Introduction to engine rebuilding class...... (http://forums.pelicanparts.com/porsche-911-technical-forum/982945-introduction-engine-rebuilding-class.html)

tmaull 01-05-2018 06:21 AM

Interested

boyt911sc 01-05-2018 07:06 AM

Overwhelmed.............
 
I never thought this would turn into a full time job. Just kidding. There is a lot of interest from all over the country. Correction, there is one guy from Europe and one from Australia on the list. So people from every where would be joining us.

I went over my long list of things to do for an engine tear down and assembly which I stopped using after doing several engine rebuilds. But for an organized group class and demonstration, I need to plan the activities and subjects to cover. Questions and answers would be part of the class activities. Basically, the engine rebuilding class is how I do the different steps in engine tear down and assembly. These are my preferred methods and you could change or modify them as you develop your skills.

Since this will be my maiden group class demonstration, not exactly sure if one day is sufficient to cover the subjects. I have not done this before. But I honestly believe, we could do it in one session. So make plan for an extra day just in case we need to review or go back to discuss more about some aspect of the engine rebuild process.

At this point, it looks like we will have two (2) sessions in April 2018. The Hershey Swap Meet will be on April 21 (Saturday) and this is my annual pilgrimage. Below is the tentative schedule:

Session I: April 12-13 (Thursday & Friday)

Session II: April 14-15 (Saturday & Sunday).

Session III: April 23 - 30 (reserved dates for additional sessions).


June 2018 sessions: No specific schedule yet.
July 2018 sessions: No specific schedule yet.

I like to have a small group like 5 participants per session so we get more hands on experience per individual. Suggestions, recommendations, etc. is highly welcome. My wife is helping me prepare a printed handouts (syllabus) from my logbook. Thanks.

Tony

livetopedal 01-05-2018 07:08 AM

This is fantastic Tony! PM sent.

Trakrat 01-05-2018 07:09 AM

I'm no where near Philly... but If you could do a recording of your class.. I'd DEFINITELY jump in on buying it!!!!!

Harpo 01-05-2018 07:20 AM

Very interested in the second class local recommend hotel would be appreciated
Thanks
David

LIRS6 01-05-2018 07:22 AM

Tony - great of you to offer, please put me down for April 14-15 if space yet available

thanks

Jason

froggert 01-05-2018 07:26 AM

Interested in a July session if scheduling works out. I've attended a few technical classes like this (901 rebuild, Ducati engine maintenance and suspension voodoo) and found them to be extremely enlightening.

Rich76_911s 01-05-2018 08:09 AM

Tony,

If I can help in any way, let me know. I can think about alternative locations with more space if you'd like.

I had the pleasure of getting Tony's help while mating the case half's of my garage rebuilt 3.5L turbo motor. He also lent me several tools including a stretch gauge for the ARP rod bolts.

Cheers
Rich

ppetion 01-05-2018 08:11 AM

I am in for April 2018, please keep in mind that the Hershey porsche show is also in April , you may have to check the date.

I will send you my email via PM

High Life 01-05-2018 08:17 AM

Interested in streaming if available - travel in April is too difficult for me.

RDUNCe30 01-05-2018 12:40 PM

Tony,

PM sent. Either of the first two sessions works for me.

Sam

tmaull 01-05-2018 01:33 PM

In for the second April class.

Alexm930 01-05-2018 02:39 PM

I would sign on for a class. Any one with availability.

evan9eleven 01-05-2018 03:23 PM

I'm game, if not April then another class. And I'm coming from Norway!

boyt911sc 01-05-2018 03:39 PM

Summer class........
 
Quote:

Originally Posted by evan9eleven (Post 9874013)
I'm game, if not April then another class. And I'm coming from Norway!


Evan,

I am planning to have a couple of sessions in June or July. A member from Germany has expressed interest to attend. Do you have a specific date in mind? The enrollment has gone beyond my expectation. To accomodate the growing numbers of participants, I have to move the venue to a bigger and spacious facility.

Tony

matt930s 01-05-2018 04:07 PM

How about videoing it and offering for sale? We could use some 911 how-to rebuild vids.

MattR

911tracker85 01-07-2018 08:18 AM

Tony,
add me to your list. I would love to attend a session in April. will each class include tear down and build. if not, pls clarify what each session would cover.

I have my 78 930 engine torn down to the case. used Wayne's book and advice from Steve Weiner and local Porsche friends. but would gladly go through the teardown again.

I'll be watching for updates.

Johnny5alive 01-07-2018 08:30 AM

I’m in for a summer class. I live in Las Vegas but would fly out for something like this.

jlong 01-07-2018 09:09 AM

I’m interested to fly out from Chicago and attend.

Prairie Lizard 01-07-2018 09:49 AM

Sign me up for any available date. (Got your PM, thanks)


All times are GMT -8. The time now is 05:58 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.