|
|
|
|
| Author |
|
|
Slippery Slope Expert
|
Engine Wiring Harness Help
I’m trying to sort out an early SC engine harness and have a question.
There is a white plastic T-shaped connector on a pigtail close to the six-pole CDI connector. It has a large red wire and a smaller wire, brown with a red trace, in it. This would appear to plug into a mating connector on the body that has a pair of red wires and a brown with red tracer in it. According to my research this is for the CDI unit. Is this correct?
__________________
“As new technologies become indistinguishable from magic, and I can no longer tinker, the magic goes away for me.” |
||
04-15-2018, 11:20 AM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,486
|
Yes, the red wire is power up for CD.
Bruce |
||
|
04-15-2018, 12:49 PM
|
|
|
ROW '78 911 Targa
|
Red is CDI power, brown/Red is the air flow safety switch to the fuel pump.
__________________
Dennis Euro 1978 SC Targa, SSI's, Dansk 2/1, PMO ITBs, Electric A/C Need a New Wiring Harness? PM or e-mail me. Search for "harnesses" in the classifieds. |
||
|
04-15-2018, 12:58 PM
|
|
|
Slippery Slope Expert
|
Thank you very much!
__________________
“As new technologies become indistinguishable from magic, and I can no longer tinker, the magic goes away for me.” |
||
|
04-15-2018, 01:11 PM
|
|
Heinz
