1966 912 short block FS

[FransE36]

I know that this is the technical forum, but there is no 912 FS section, so here goes..

I have a 1966 912 block that was taken out of a running car and stored.

This engine has cam, crank, rods, bearings, rubber mounted oil cooler, lifters, oil filter canister, and was running in 1995 when it was taken out of my dad's 1966 912.

He left some oil in it so as not to let the lifters, cam, or crank rust.
The heads, cylinders, and pistons were taken off of this engine and used elsewhere.

I would like to get $1350.00 for it complete. If nobody wants it complete, and I get a whole bunch of part out requests, I may do that down the road, but I just want it gone as a whole. I know that the crank alone is worth $1200, so you do the math.
Let me know if you have any questions, and I'll try my best to answer them.

FS: 1966 Porsche 912 1600cc engine block, rods, crank, lifters, cam, and everything else pictured. This was running perfectly when taken out and apart.

Oh yeah, .009 dist. included too.