torque specs
 

Hello ..does anyone have the torque specs for the crankshaft pulley bolt and the clutch plate bolts.. I thought I had them but the book does not state the torque for these. 1966 9/12 thanks bob

seriously .... I don't want to guess.... no one have that info that I can find...

Clutch plate: 25 ft. lb. (page 123 Orange book)

Crank pulley: 43 ft. lb. (page 213 Orange book)

Thank you .... I used to restore back in the 70's and 80's. so I did not want to go on memory... I already did 50 on pulley so I'm about 14% over and 28 on plate so about 12% over ...so I'm relatively consistently wrong..... but I think it will be ok.... too late now...... what is the "orange book"? Is it for 356 and 9/12 data. Or a work shop manual. I was surprised to see in the books I have that only certain operations give the torque values.... mostly they just say assemble in reverse order..... thanks again bob

The "Orange book" is mostly reprints from the Factory 912 manual supplement (Service Guide for the 912 Engine). My old copy is published by Lash International with a 1991 copyright by Mel Kay.

http://forums.pelicanparts.com/uploa...1433632141.jpg

BTW I could not find the specs for the crank pulley in the 912 Factory manual or the 356B manual.

Thank you again.... Yes I have had the Original 9/11 shop manuals but I never got around to getting the 9/12 supplement. I have the 356 b work shop manual. Thanks for letting me know you could not find it there either..... I have been very suspicious of my eyes these days.. I will definetly find this "orange book .... and thanks for showing a picture of the book, That's a great help in finding the book. bob

The 912 Forum has a sticky with digitized workshop manuals.

912E Manuals

Also tons of info on 914 world

Edit: Ah, sorry, just saw this is for a 66 912, diddnt see that.

Wow... Steve... That's a great treasure trove of info for the 9/12E... bob