![]() |
|
|
|
Registered
|
V8 conversion help?
Anyone in Orange county or south LA county want to help me get my car going? I am doing a V-8 conversion on a 914 Chalon conversion. I should have the parts by the end of the week but I have so much to do. Anyone with V-8 conversion knowledge would be greatly appreciated. I can supply beer and food too. As for what needs to be done, I need to install the front and rear sway bars, finish the 5 lug conversion front and rear, cut out the front for the radiator and run the plumbing, configure the engine and trans together with the accessories, and install it. Then I can finish the body work and hopefully at least get it primered for the WCC. So any help would be greatly appreciated.
__________________
http://www.pelicanparts.com/gallery/skline It's easier to get forgiveness than it is to get permission. 75 Slantnose V8 03 S-10 Extended cab stepside in Yellow 72 914 Parts car |
||
![]() |
|
Registered
Join Date: Jan 2003
Posts: 414
|
So if anyone has an extra 1000 hours on their hands, please let him know. Thanks
|
||
![]() |
|
Registered
|
I could do it myself in less than 1000 hours. In fact, I will. I have helped others with their projects, so I thought I would ask for some in return. I will get it done. Thanks anyway.
__________________
http://www.pelicanparts.com/gallery/skline It's easier to get forgiveness than it is to get permission. 75 Slantnose V8 03 S-10 Extended cab stepside in Yellow 72 914 Parts car |
||
![]() |
|
Registered
Join Date: Jan 2003
Location: Upstate New York
Posts: 600
|
Dood if I lived closer I'd be all over that - I was thinking of putting an 8 in mine, and have already done a lot of what you're gonna do....
Gud luck! Jeff
__________________
- "NOW" Magically Delicious - |
||
![]() |
|
![]() |
Thread Tools | |
Rate This Thread | |
|