Torque Thrust Mag? and Picture

[peter carroll]

Here is a picture of the American Racing Torque Thrusts that I have. As you probably know already, I am trying to find duplex lugnuts to fit them. 14mm X 1.50 They are the kind with washers. Thanks for any help. Pete

[peter carroll]

Sorry, For some reason I am all of a sudden unable to post pictures. I'll keep trying.

[Dave at Pelican Parts]

What kind of error message are you getting?

--DD

[Conrad W Peden]

For pics try here: http://www.terovirta.com/volks/Frame.html click on the "California Look wheel guide" near middle bottom

or here: http://www.kinkymickshappywheelshack.com/ check his wheel selection...

[Acox914]

these?

[Acox914]

looks like two different manufacturers....

[914/6]

Those 2 pic are the same american racing 15x7 alum wheels., they also did mag. ones that are slightly different.
Plug and make 4.75, probably gonna run on a pre 67 corvette.
Torque thrust terry buys the porsche alum 15x7's as pictured and redrills em for the early vettes. som *****.

[peter carroll]

Thanks Aaron, those are the ones. Now back to the original question. How do I keep these wheels on my car? I was PM,ed a possible solution to the lugnut problem and have talked to Jeg,s about this. I need to call them back with some measurements. In the meantime, if anyone has these on their car now, please let me know were you got you lugnuts. Thanks, Pete

[914/6]

I used a Gorilla locking lug set that was 1/8 too long and had 12x1.5mm thrd.. I trimmed and re-tapped them. What size is your lug hole ? Alot of these wheels have been opened up to use the more readily available .740 dia. Factory is .69-.70

[914/6]

Here is a thread about the same thing , He ened up using the same P/N sent you.
http://www.early911sregistry.org/forum/showthread.php?t=8131&highlight=american+racing

[peter carroll]

914/6, They look as good as I had hoped. Very nice. Thanks for all the help. Pete