5 Bolt Conversion--Need Spacer Help!

[Brian Bohannon]

Help!! I need a spacer solution in a big way! I have converted to the 5-bolt setup on my 1971 914 and have added large Wilwood calipers and huge vented rotors. The rotor is hitting the ball joint and I need about 1/8 inch to get the rotor off the ball joint. This will still allow me to center the caliper with the rotor. I have three 1/4 inch spacers in there now. Wanted to swap two of those for two 5/16 inch spacers to effectively give me the 1/8 inch. No 5/16 inch spacers are available (Performance has them in their catalog but they are actually 1/4"). Any ideas? Know anyone that custom makes spacers?