|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2006
Posts: 96
|
Preparation for Starting Rebuilt Engine
Hi all - Upon further search I have found the info I need.
Last edited by 94teener; 07-13-2014 at 01:03 PM.. |
||
07-12-2014, 12:16 PM
|
|
|
Resident Electrician
|
If it has been sitting for that long, I would pull the plugs and use the starter to prime the system. Pulling the plugs will take the compression load off the bearings while you spin the motor. Once you see the oil light tun off, put the plugs in and see if it will run.
__________________
Current Project: 73 914, 1.8t, ~300hp, 930 Brakes, Roll Cage Past Projects: 69 911, converted to C2 wide body cabriolet 3.2L 72 914, Ford 5.0L V8 EFI |
||
|
07-13-2014, 06:49 AM
|
|
|
Registered
Join Date: Aug 2006
Posts: 96
|
Thanks for the tip Mike.
|
||
|
07-13-2014, 01:04 PM
|
|
Sasquach
