how 2 remove glue???

[JB2]

How do i remove the factory glue left under the carpet,without damaging the surface/paint? any help would be great,thanks

------------------
MSD 6A,JACOBS WIRES,BOSCH 15V COIL,+4'S,THROTTLE RESPONCE CAM,CUSTOM COLD AIR INTAKE,K&N FILTER,BURSCHE HEADERS,2 1/4 PIPING,HIGH FLOW CAT,FLOWMASTER 3 CHAMBER, TURBO FRONT END,MOMO STEERING WHEEL,STRUT BRACE,KYB'S,MOROSO BATT. BOX AND CUT OFF SWITCH,KENWOOD CD,AUTOMETER TACH AND OIL PRESS GAUGE,SUMMIT DATA RECALL SYSTEM,FALKEN TIRES,EPSILON TWO PIECE RIMS.

[stray15]

Go to your local auto parts store and tell them what are you going to do. They should point you in the direction of a certain Universal Cleaner. It should take the glue right off and is no harm to the paint. Good luck.

---

Porsche, through and through
Tim
'83 944

My Photo Page
My Home Page

[Flight 951]

Try 3m Adhesive Remover. It is strong yet doesn't harm the paint finish. I sprayed it on the sides of my 951 to remove a tape pinstripe and the residue from the gravel guards. Works well and the paint still looks fine.

[JB2]

thank you flight 951,i wil try that...JB2

------------------
MSD 6A,JACOBS WIRES,BOSCH 15V COIL,+4'S,THROTTLE RESPONCE CAM,CUSTOM COLD AIR INTAKE,K&N FILTER,BURSCHE HEADERS,2 1/4 PIPING,HIGH FLOW CAT,FLOWMASTER 3 CHAMBER, TURBO FRONT END,MOMO STEERING WHEEL,STRUT BRACE,KYB'S,MOROSO BATT. BOX AND CUT OFF SWITCH,KENWOOD CD,AUTOMETER TACH AND OIL PRESS GAUGE,SUMMIT DATA RECALL SYSTEM,FALKEN TIRES,EPSILON TWO PIECE RIMS.