|
|
|
|
| Author |
|
|
Registered
Join Date: Sep 2007
Posts: 76
|
Quick reference sensor question
Is it ok to install reference sensors with anti-seize compound? (the kind used for spark plugs)
|
||
08-19-2009, 10:59 AM
|
|
|
Registered
Join Date: May 2002
Location: Tioga Co.
Posts: 5,942
|
I did. No operational problems, haven't checked to see if it helps in removal later, won't grauntee it isn't a horrible idea, but like i said, no problems.
__________________
'86na, 5-spd, turbo front brakes, bad paint, poor turbo nose bolt-on, early sunroof switch set-up that doesn't work. Malo periculosam, libertatem quam quietam servitutem. |
||
|
08-19-2009, 11:10 AM
|
|
|
Registered
|
go ahead, it will make removal and reinstall very easy. i've done it a few times already and the car still runs.
__________________
1993 964 C2 still makes me smile Retired and work as needed as a pain in the **s. |
||
|
08-19-2009, 11:25 AM
|
|
|
Registered
Join Date: Sep 2007
Posts: 76
|
Great! thanks a lot, it seemed like a good idea but was afraid of hurting the signal somehow. This is good news.
|
||
|
08-19-2009, 01:49 PM
|
|
911
