FS - Nice condition OEM Beru Plug Connectors

[Ramp]

I took these off my 86.6 928 (Car only has 40K miles) and had been garage kept by original owner) when I replaced the wires only to realize the plugs were in really nice condition (with one exception below). The connectors all are clean and the rubber is soft and pliable. One of the connectors was damaged - shown in the pic, otherwise they are all in really good condition.

Thanks

Thinking around $100 for all

[stepson]

They do look nice and soft and all that, but you do realize that the only thing that matters is that they conduct and electrical charge, right?

Did you test continuity in each one?

I wish you good luck with your sale.

[Ramp]

Thanks for the advice - I will do that and post back. I did look at all the connectors and there is no corrosion and the connectors are all clean and shiny. In hindsight I only needed to change the wires, and not sure I needed to do that since I didn't have any rough running issues. This was more of a WYIT and cosmetic project as part of the intake and cam cover refresh jobs.

Assuming continuity checks, which I'm sure it will, do you think the price is right ? Just not sure what's appropriate.

Thanks

[stepson]

They do look good, no doubt about that.

I think the price is probably okay. I'm not in the market, but if I was, I'd say it's an okay price.

[Ramp]

Bump - And I tested and have good continuity on each connector.

[Danglerb]

Been awhile since I last refurbished some wires, but I recall a specific resistance range for some part the harness.

[Tim Boyer]

Any chance these would fit a ‘84 928 S? If so, I am interested.
Tim

[Ramp]

I don't think so, that's a 16v car and these are for the 85-86 32v cars - but since it's just the connectors and not the wires, they might.

[1982_928]

Originally Posted by Tim Boyer

Any chance these would fit a ‘84 928 S? If so, I am interested.
Tim

No, they will not. Different connector altogether.

[Ramp]

Garage Clean Up Bump

[Ramp]

Bump - make offers