|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2014
Posts: 332
|
Flywheel lock tool
Hi
Porsche 1986 s2 AUTO Do i put flywheel locking tool where starter motor goes .Or is there another place like on the manual cars.Thanks |
||
03-06-2022, 05:21 AM
|
|
|
Kyle C
|
I believe all the automatic cars have a small blanking plate where the clutch slave cylinder would normally mount up on the 5spd cars. Remove the blanking plate (two 13mm bolts?) and install the flywheel lock in its place.
__________________
1974 911 1978 928 5spd hillclimb special 1984 928S 5spd, 1986.5 928S auto 1983 944, 1984 944 track car 1995 Saab 900 S, 1997 Saab 900 Turbo, 1999 Saab 9-3 S |
||
|
03-07-2022, 05:51 AM
|
|
|
Registered
Join Date: Dec 2021
Location: DC Area
Posts: 25
|
That's correct. The automatics have a block off plate in place of the clutch slave cylinder. I don't recommend securing the flywheel lock with the bolts that hold the block off plate in place. The block off plate bolts are too short for good thread engagement and will strip out of the housing threads when used with the flywheel lock.
Match up the bolt threads and get longer bolts. The holes go all the way through and have plenty of room behind them, so you don't have to worry about getting exactly the right length. |
||
|
03-09-2022, 04:21 AM
|
|
|
Registered
Join Date: Mar 2010
Location: Texas
Posts: 2,135
|
Good call on that, Shifted!
__________________
John Curry (Drift King) 928OC member Grand Prix White 1994 GTS AT (The GTS) Black 1989 GT (The GT) and Cobalt Blue 1989 S4 AT (The Blue Car) 1986 Euro AT Indishrot 1984 Euro S AT (The Stepson) and Black Metallic 1984 Euro S 5 speed (The Schwartz) |
||
|
03-09-2022, 06:40 AM
|
|
