Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 928 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered User
 
pumpkinhead's Avatar
 
Join Date: May 2011
Posts: 58
Garage
Flex plat question

So one day recently my 82 auto. developed a rattle in this area, only does it in gear at idle, if I give it a little gas it stops, my question is if a shop deals with this issue any ideas of cost ? should I setthe car off to the side until I have time? thanks

Old 12-30-2012, 06:48 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
928: Serial Enabler
 
Join Date: Sep 2007
Location: Elkhart, Indiana
Posts: 2,929
Location? Shop experience with 928?
Hard to say. Lots of stuff can rattle, including flexplate rivets --- rear flexplate, back by transmission.
I guess people drill them out and replace with bolts.

I noticed a rattle on an 84 5spd.
Turned out that the round rubber inspection cover on the bell housing hardened and shrunk.
It rattled at idle.

Last edited by Landseer; 12-30-2012 at 07:12 PM..
Old 12-30-2012, 07:07 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered User
 
pumpkinhead's Avatar
 
Join Date: May 2011
Posts: 58
Garage
WA state, and I had let the car sit for about 5 months, while I tackled a different issue.
Old 12-30-2012, 07:14 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
Dean_Fuller's Avatar
 
Join Date: Oct 2008
Location: Columbus, MS
Posts: 845
Are you sure its not exhaust touching somewhere?
__________________
1980 AUTO Synergy Green Metallic / Black & Grey ( my son's)
1989 Auto Slate Grey Metallic / Cashmere & Black (mine)
1982 5-speed White / Black sport seats ( brothers )
Old 12-31-2012, 07:58 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Petie3rd
 
Mrmerlin's Avatar
 
Join Date: Jul 2000
Location: Philly PA
Posts: 4,528
Send a message via Yahoo to Mrmerlin
remove the lower bell housing cover and take a picture, post it
__________________
^^^ Stan ^^^ 2019 BMW K1250 GS 2016 HD RK
1988 S4 Auto , Elfenbein Perlglanz, Pearl Gray
1982 5sp Met black and tan sport seats
Old 12-31-2012, 08:04 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Registered
 
Dean_Fuller's Avatar
 
Join Date: Oct 2008
Location: Columbus, MS
Posts: 845
Here is a video of my 89. I had a rattle sound. I have rebuilt the TT with new bearings as I think that is what was bad on mine I think. have not completed the repair yet.

https://www.youtube.com/watch?v=SH_F612UUyM

__________________
1980 AUTO Synergy Green Metallic / Black & Grey ( my son's)
1989 Auto Slate Grey Metallic / Cashmere & Black (mine)
1982 5-speed White / Black sport seats ( brothers )
Old 12-31-2012, 12:48 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Reply


 


All times are GMT -8. The time now is 08:19 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.