|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2005
Location: louisville, ky.
Posts: 37
|
high performance clutch assembly
Hi guys&gals, I have a TT, (1991 Normally aspirated Carrera 4 converted to a TT, )742 HP on the ground. After approximately 3000 miles the clutch will slip in all 5 gears, it is also VERY stiff, lots of pedal pressure! Does anyone have recommendations regarding a different slave cylinder and clutch assembly that will reduce the pedal pressure and hold the torque/hp? Many thanks for your input. TJN/Vettekiller
__________________
tjn/vettekiller |
||
12-25-2007, 07:03 PM
|
|
|
Moderator
|
I thought S-Car-Go racing in Marin has a high HP clutch solution for the monster motors they make. But a quick check of their website does not list. You might want to call Rob King.
You can also search for user "Poorb0yw" - he installed a Tilton clutch, don't know if he did anything to the hydraulics, but when you see his car, it will be hard to believe he didn't touch it.
__________________
Don Plumley M235i memories: 87 911, 96 993, 13 Cayenne |
||
|
12-26-2007, 07:43 AM
|
|
1987 Porsche Carrera 3.2 
