993 front bumper removal?

[flashf16]

'96 993 C4S front bumper got tagged so I need to remove it. Any tips or resources for all the detach points? I have the lights off, but can't see everything else that needs unbolting.

[ttw18]

I believe p-car.com has a DIY writeup

[Chuck W.]

Here you go; Bumper

[TMc993]

Here ya' go...Bumper

[cgfen]

Originally Posted by TMc993

Here ya' go...Bumper

LOL
wish i would have seen this yesterday before i took off my BC, or maybe the DIY would have just confused me?

this is a "spare" BC i installed just for the drive to the paint shop

[jhubs]

The front 1/2 of the fender liners need to be removed and there will be screws under the front lid that needs to be removed. Also, there will be some screws under the bumper to take out. The front bumper removal is very intuitive and is a 2-3 on a scale of 10.
I found it to be easy except for the black plastic fender liners...a real PITA! I replaced my old OEM bumper with a Euro Turbo bumper and I took off the bumper and took it out to paint and back on only to find out the color was wrong so I took if off again. The last time I put it on it took only 15 minutes. Good luck!