Post pics of 965 front spoiler/ spliters

[sc]

I am looking to add a front spoiler/ splitter to my 965/c2 turbo. Hard to find a nice one, looking to see what is available.

Thanks
sc

[klein930]

check out rennlist under non turbo 964. Do a search and you will find a large thread with lots of pics. Also the 964 and 964T use the same front bumpers so try to search for 964 splitter. I also think someone on this board was selling a nice looking new carbon fiber one piece in your area just a couple of weeks ago.
Hope this helps

[sc]

Thanks!

[totle]

Bumping live in this old thread.

Looking for a front splitter for my 964 turbo front bumper.
I have been looking at the GT2 front splitter from both rennspd and TRE, but think they don't look as smooth as the 993 gt2 splitter.

TheGT2 splitter for the 964 turbo looks too wide down on the sides.

Please post pictures of front splitters

[fat cab]

from rennspeed

[fat cab]

another

[PNine64]

Originally Posted by totle

Bumping live in this old thread.

Looking for a front splitter for my 964 turbo front bumper.
I have been looking at the GT2 front splitter from both rennspd and TRE, but think they don't look as smooth as the 993 gt2 splitter.

TheGT2 splitter for the 964 turbo looks too wide down on the sides.

Please post pictures of front splitters

I have a new splitter I bought from ebay a few weeks back. The way the ad was written it looked like it was for a 964 but when I received it I found it was for a Turbo (sort of an impulse buy since there was only 3 minutes left and I didn't have time to research). I'll post pics when I get home. It looks more like the 964 RSR lip from Rennspeed but it has the full bottom pan (like the GT2).

[totle]

Originally Posted by fat cab

another

Really like the GT2 front spoiler, but like better the way 993 GT2 splitter is. More narrow and closer to the bumber.
I would like the 965 GT2 splitter to be a little more like this

[PNine64]

Originally Posted by PNine64

I have a new splitter I bought from ebay a few weeks back. The way the ad was written it looked like it was for a 964 but when I received it I found it was for a Turbo (sort of an impulse buy since there was only 3 minutes left and I didn't have time to research). I'll post pics when I get home. It looks more like the 964 RSR lip from Rennspeed but it has the full bottom pan (like the GT2).

[TRE Cup]

We are going to make a new GT2 965 spoiler soon. This time the winglets will be closer to form like the 993, and I will be keeping the mold under my control
(so others don't get to go around us ! of course, there is nothing to stop them from buying one 3rd party and spending $$ to copy our part ... sigh)

It is scheduled to be ready by summer

[totle]

Hi Dave,

Just ordered from you (Dave) at TRE Motorsport. Spoke with you this week (Trond From Norway)

Will I be getting this new splitter? If not I would like to wait for the new one.

Kind regards
Trond

[totle]

Dave, any news on the new spoiler ?

[TRE Cup]

unreal- it will be a year soon, since we embarked on a new version !

Well the good news is that i will post pics tomorrow of the plug our body shop has been working on, test fit to a 965 turbo front end.

the other good news is our molder can have production parts ready in 3 weeks after the plug is delivered

The not so good news, for today, is I won't know how much more work the plug will take till tomorrow when i can see and measure for myself. The contours have to be right for molding, otherwise you can't take the part out of the mold !

stay tuned... and patient
thank you

[fat cab]

Originally Posted by TRE Cup

unreal- it will be a year soon, since we embarked on a new version !

Well the good news is that i will post pics tomorrow of the plug our body shop has been working on, test fit to a 965 turbo front end.

the other good news is our molder can have production parts ready in 3 weeks after the plug is delivered

The not so good news, for today, is I won't know how much more work the plug will take till tomorrow when i can see and measure for myself. The contours have to be right for molding, otherwise you can't take the part out of the mold !

stay tuned... and patient
thank you

that would be great! The wife managed to tare mine off this summer...

[moacur]

Any updates on this

[TRE Cup]

Yes yes yes !
the plug is almost ready to make the mold We test fit it to a 965 and very happy with the new look and fit.
will post pics of the plug before the drop off at our mold maker

We will have product, ready to sell, by June 1

finally....

[jimtweet]

can someone for the love of god please produce this front lip

[moacur]

Seems like Tre's new lip will be very similar to that. Cannot wait to see them once he posts some pics!

[tasracer]

Originally Posted by totle

Hi Dave,

Just ordered from you (Dave) at TRE Motorsport. Spoke with you this week (Trond From Norway)

Will I be getting this new splitter? If not I would like to wait for the new one.

Kind regards
Trond

Hey Trond u have a turbo?
It's Dreamer ... From offshore only

Funny finding a few OSO peeps here and on rennlist

[empire0007]

Here is a picture of mine