|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
914-6 RHD Race Car
Porsche 914-6 race car
I have decided to sell my 914-6 race car so I can move onto my next build which will be a motorcycle engined P2 sports racer. I spent 12 years building this car and raced it for about 5 years. It is a very fun car to drive with good manners on track. If you are looking for a car that is very unique I offer this car for $20,000 OBO. You can email me at neil.cawley@comcast.net. Engine • 2.3 liter six, 66mm stroke x 86mm bore ; Zero hrs on the engine • 10:1 compression, JE pistons with biral cylinders • Dougherty Racing Cams DC60 • Zenith 40 TIN carbs with 40mm chokes • Twin plug heads fired by two distributors • Two MSD ignition boxes and coils • 3 gallon oil tank for the dry sump system • 4 rib oil pump • Stock 2.0 liter rods with ARP bolts Transmission • Close ratio 901 Porsche gearbox • Open differential • Gear ratios A, I, N, S, X o These gears are good for Road Atlanta and Roebling Road • Stainless flywheel with twin disc Tilton 7.25” clutch Chassis • Right hand drive • Open cockpit • Kirkey racing seat • 1 ¾ , 0.095” thick main roll hoops • Front suspension modified to lower and provide 1 degree negative chamber per one inch of compression • Front shocks are Bilstein Scirocco ; 23mm front torsion bars • Rear shocks Proshock • Front sway bar • 911 A type calipers on the front and 911 M type calipers in the rear • Vented rotors • Carbon fiber/ honeycomb doors, deck lids, and dash • 15 gallon ATL fuel cell • Car weighs with fluids 1700 lbs • Car has a SCCA log book Wheels and tires • 2 BBS 7 x 15 currently on the front of the car • 2 BBS 8 x 15, not used • 2 Enkei 7 x 15 currently on the rear of the car • 4 Compomotive three piece wheels with centers like the BBS’s • Goodyear racing slicks, 23.5 x 9.5 x 15 Spares • Assorted transmission parts • Parts for a magnesium cased 2.0 liter • Front control arm • Rear control arm • Assorted fiberglass fenders and other body parts • Spare brake pads Hawk blues • Gaskets      
Last edited by neilca; 06-28-2015 at 07:02 AM.. Reason: Make the price more obvious |
||
01-18-2015, 08:49 AM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
Here are some more pictures
   
|
||
|
01-23-2015, 12:25 PM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
Here is a picture of the underside of the decklid. The front and rear hoods are made of carbon fiber and honeycomb. The doors are the same construction.
 How about a price reduction,,,,$30K Last edited by neilca; 02-28-2015 at 09:13 AM.. |
||
|
02-07-2015, 05:47 AM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
Price reduced to $30K
|
||
|
02-28-2015, 09:13 AM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
Here is a picture of the car during construction. The steel part has been welded and the whole thing is coated in POR 15.
|
||
|
03-20-2015, 03:17 AM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
The car is still for sale
|
||
|
04-02-2015, 04:15 AM
|
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
Racing season is starting, this car is ready to go.
|
||
|
04-24-2015, 06:58 AM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
The car has been to the dyno and put down 175hp at the rear wheels. I am getting ready to go Road Atlanta for a track day. I have decided to drastically reduce the price since the market is so soft right now. I will take $20K for the car.
|
||
|
06-28-2015, 07:01 AM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
The car is SOLD
|
||
|
07-22-2015, 02:05 PM
|
|
