Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche Engine Conversion Tech Forum (http://forums.pelicanparts.com/porsche-engine-conversion-tech-forum/)
-   -   911 LS Conversion info (http://forums.pelicanparts.com/porsche-engine-conversion-tech-forum/1170394-911-ls-conversion-info.html)

wstrndrivr 11-18-2024 02:39 PM

911 LS Conversion info
 
I'm new here and this is my first post. It's also my first foray in attempting to find more info on 911 LS conversions so please excuse my ignorance as I come up to speed.

A long time ago I took a ride in a 500HP V8 powered 914 and never forgot it. I'm just over 60 now and still it comes to mind but just have been so busy I never went forward with anything.

I'm getting closer to retirement now want to find out more of what's going on in the area of LS conversions and then start down the road of acquiring one. I've been to the Renegade and CPE sites and elsewhere so I'm starting to get an idea.

What I have in mind (which may be uninformed as it's likely there's much I don't know that I don't know) is a earlier 911 --before 1990-- finished in a wide body format around 500HP.
In general, what forums are most focused on 911 conversions and is there any two or three websites where most of the info can be found about people who are currently doing the conversion?

And finally, as I'm still busy with work for probably a few more years, it's possible I may hire someone to do the conversion or purchase an existing converted car. It's the money vs. time thing.
Any suggestions for someone who has a track record for building these conversions? Is it either CPE or Renegade?

Thanks!

YellowBee69 11-19-2024 02:51 PM

That, or find someone semi local that has done it or can do it… I have a 74 RSR clone with an LS1 and I put a 996 transaxle in it. My thread on here is the 68 ls swapped project. (It’s a 74rsr clone). You can source parts on your own, or purchase from big companies. I think there are enough people doing it now that can help out.

Ryan_Cunningham 11-20-2024 08:43 AM

CPE to my understanding only does conversions for 996 and up 911s.

wstrndrivr 12-01-2024 07:19 AM

Hi obthomas, thanks for that. I've currently got 911's and 914's on my mind and right now and haven't strayed towards Boxster's yet. I like the purple, though.

Cobalt964ruf 12-01-2024 02:12 PM

Cpe charges around 60g for a completed car. Renegade charges 40g to convert your existing car. If you are handy you can buy a car the kits and Ls engine of your choice for around 30-45g depending on the donor.

1rad55 06-08-2025 01:11 PM

Quote:

Originally Posted by YellowBee69 (Post 12360838)
That, or find someone semi local that has done it or can do it… I have a 74 RSR clone with an LS1 and I put a 996 transaxle in it. My thread on here is the 68 ls swapped project. (It’s a 74rsr clone). You can source parts on your own, or purchase from big companies. I think there are enough people doing it now that can help out.

YellowBee69....I'm currently building a LS conversion on my 1988 911 Carrera coupe. I'm using Renegade Hybrid kit to include 996 six speed transaxle. Question .... do you have any pictures of your modifications to the 911 rear tunnel to make room for the longer 996 trans. Thanks in advance for responding to my question!!!


All times are GMT -8. The time now is 06:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.