Heyyyyy. So I had my bike all apart to crack open the transmission, to fix a shifter issue. All went swimmingly. Problem is, I failed to check the clutch action before complete reassembly, and now the clutch lever has no backpressure to speak of. Pump it a bunch of times, and the fluid level in the reservoir isn’t going down, so I assume it’s not a leaky slave. For reference: I never opened the hydraulic line, and I never touched the clutch/flywheel assembly. Only removed/reinstalled the trans, the slave cylinder, and actuator rod.
So, hey! I know the odds are that my slave cylinder failed, and i need to take the whole rear end off again. BUT. What else can I check before I do that?
