|
I recently tried to use the URO seal on the rear of my 1988 and gave up. The cross section was correct, but the profile was rotated 90 degrees from where it should have been. One had to roll the trim 90 degrees to get the seal to insert over the edge of the window and this caused a major wrinkle in the corner that would not flatten out even with heat. The point where I gave up was when I bent the new aluminum trim pieces trying to work the corners. I then went to the local porsche dealer who gave me wholesale price on the OEM seal and new trim pieces. No offense to our hosts, but it is also best to get the trim pieces locally as the ones I received in the mail were bent on arrival.
|