Quote:
Originally Posted by Trackrash
What did the alignment "tec" have to say?
If you measure from the center of the front wheel, when its pointing straight ahead, to the center of the rear wheel, is it the same on both sides of the car?
|
Yes Track Thanks for reply, we did meassure that way too. It was about a 1/2 to 1 " out. Techs were capable but might not have much 911 experience. Said its to far out would knock off sensors.
I'm running 17" x 8" euros in front 17x 9 in back. 1977 with SC style flares. we think its control arm, but still trying to prove it right or wrong. Welcome any more thoughts.
I have an extra steel cross member that seems true, if we go with new control arms will give it a try too. Our fear is cross member mounting point with aluminum crossmember may be in play. No visual damage to cross and body lines etc.. looks about as good as a Targa can be, doors hood fenders all good doors ring when closed.