Quote:
Originally Posted by mb911
The right side is within .003" to the layshaft.. The left side I am trying figure out how much I need to subtract so I can compare from right side..
Tony is that what your getting at?
|
Ben,
What are your measurement data? The procedure is very simple. Measure the following:
a). Measure the depth of the intermediate shaft face in mm from the edge of the crankcase. Call this “A”.
b). Use a straight edge to measure the distances of the left and right sprockets. Call the measurements “L” (left) and “”R” (right).
Calculations:
L - A = is your left side sprocket alignment distance value. Control L = 98.07 mm
R - A = is your right side sprocket alignment distance value. Control R = 43.27 mm
Compare your measured distances to the controls with 0.25 mm +/- tolerance.
Tony