I have to give props to Bryan Lutz. Bryan makes the replacement instrument cluster circuit boards. Not only are the circuit boards quality, Bryan himself is pleasure to deal with. I had some issues with the circuit boards to begin with and Bryan was quick to respond to help out, even though I was the one who plugged the wrong connector to the wrong plug and had a few bad (bent) pins. After I fixed my goof up, Bryan worked with me on eliminating a few of the warning lights that don’t connect to the LS wiring. If you have read other LED light conversions you will find out the leds are very bright and you need a dimmer and resistors, I purchased all that stuff before realizing my circuit board had major issues. Bryan did a lot of research and found led bulbs that are just the right brightness, so no need for a dimmer. In fact I used one if the spare bulbs and replaced my led bulb in the light switch and the brightness was much less.
Anyhow, great product and great guy
