[Targa_whaletail]

Hi,

I have heated power flag mirrors on my 1984 Carrera 3.2. They are the older type with the solenoid and motor. (glass with three tabs) I have had a couple of goes at fixing these but have now decided to upgrade to the newer flag double motor type (glass with circular mounting).

If possible, I'd like to avoid adding relays.

What I started with:

91173103508 wing mirror flat glass
91161311300 door changeover switch (single pole)
91161311500 door control switch / joystick
and the original motor + solenoid "fishline" with gearing box

What I think I will get:
2 of: 94473102701 door mirror motor assembly and pigtail
2 of: 94473103503 convex wing mirror glass
1of: 92861324100 joystick

I'm unsure if I need:
92861254200 connector housing
91161342300 assembly frame

And I've no clue if this control box is needed:
PCG73102806
Maybe this is for memory on much newer cars..?

I have some questions please.
- Will the new motor assembly fit onto the old mirror mounting? (gulp)
- Are the connectors at the mirror the same?
- Can I avoid relays? Do I need the changeover switch, and will it fit in same location as the old one?
- Will the new joystick fit OK? Do I need the connector housing and assembly frame?

Bentley seems to have the wiring diagrams backwards (shows solenoid on newer rather than older cars). But no hint of the control box?

What wiring will I need to change? I think it may be one new wire - once I upgrade the joystick, and maybe a relay if I don't change the changeover switch to the later dual pole.

Thoughts? Thanks!