Quote:
Originally Posted by uwanna
these are very durable relays rated at 6A/250V. Mirrors certainly don't require very high amperage. Just solder them into the wiring in the mirror and use heatshrink or electrical tape, then wrap the "package" with electrical tape. there is plenty of room in the mirror housing with the new dual motor assy and no need to "pot" them or anything.
EDIT: here's the data sheet on this relay https://www.alliedelec.com/m/d/8edbf80c718918d03035193cb3eaf534.pdf |
Would you use a flyback diode across the relay coil - e.g., UF4004 ?