Hello installing a MSD ignition in my 1982 911SC and would like to confirm a few things.
After a bit of time making a custom bracket for the unit to mount to the aluminum relay panel I am down to a few electrical connections I would like to confirm.
I am installing with spade connectors to the former Bosch CDI 6 pin connector. So far I have done the following:
- Large Red wire, to starter and connected to battery cable connection
- Heavy Black wire, to engine aluminum relay panel ground
- Small red wire, to 6 pin connector contact 15, ( red wire)
- Orange wire, to 6 pin connector contact A, ( white wire to (+) on coil)
- Black small wire, to 6 pin connector contact 31/1, ( brown wire to (-) on coil)
I have yet to do the following and assume these are my connect points:
- Gray wire, to 6 pin connector contact TD, (Black with violet strip)
- Green MSD wire, in separate harness for magnetic pick up, to 6 pin connector contact 7 , ( green wire center core)
- Violet MSD wire, in separate harness for magnetic pick up, to 6 pin connector contact 31D, ( shielding of the green wire)
Lastly white wire will not be used.
If anyone that has installed in a similar 911 could confirm what I have written above. Thank you all.
Jeff
