Thread: Hit Shoulder
View Single Post
jyl jyl is online now
Registered
 
jyl's Avatar
 
Join Date: Jan 2002
Location: Nor California & Pac NW
Posts: 24,851
Garage
Hit Shoulder

Okay, here is one for the docs.

I crashed my bike (bicycle) on Monday. Riding to work, a block from my house, took a freshly paved corner and didn't see the sand that the construction crew had carefully spread on the surface. Front wheel washed out and I went down hard on my right side and slid. Couldn't get up right away, eventually unbuckled my backpack, pushed the bike off me, got on my hands and knees and slowly stood up. Bloody rashes on right calf, hip, waist, ribcage, forearm, upper arm/side of shoulder; gloves torn up; sand in my kit, wounds, backpack; right shoulder hurt and was hard to move right arm or lift with right hand. But nothing seemed broken.

My experience in these things is that unless something is broken, you have to get back on the bike and keep riding. Otherwise you stiffen up and soon can't move. So I got back on the bike and rode (slowly) to work and home that afternoon (26 miles).

Its five days later, and the rashes are healing, but my right shoulder still hurts. I have full range of shoulder motion, although some of it is a bit painful. I can lift light things with that arm. I have been feeling the clavicle as I move my arm, and nothing seems to be disconnected or moving around in there. I've ridden to work twice more and this morning did about 10 miles with some slow climbing and descending. I can ride normally, including out of the saddle.

The only thing that bugs me is a 1 inch area on the upper surface of my shoulder, just inboard of the joint, that is painful to pressure and where I feel a subtle lump.

My sense is that this is all normal and at worst I have a bit of a hairline fracture or something, so I should just keep on doing what I'm doing and not worry about it.

Make sense?
__________________
1989 3.2 Carrera coupe; 1988 Westy Vanagon, Zetec; 1986 E28 M30; 1994 W124; 2004 S211
What? Uh . . . “he” and “him”?
Old 07-28-2018, 12:37 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)