Here is what I have. Did a little more research and drew a better diagram so its clear.
Where it is short I think I can make it reach. The previous owner had the line tied to the brake line making it short and not connecting to anything. I cut the ties and think I can make it reach the four way.
Am I missing the vacuum check valve? This picture from honerboys and pictures I found googling show a blue and black check valve before going into the four way. When searching for parts on Pelican the brake check valve listed for my year is different from the what I have and the blue/black check valve. Pelican says the blue/black check valve may not be for my car.
This is what comes up when I search Pelican for my brake check valve. Different from my setup.
Here is the other check valve
Are there two check valves?
For the forth, unused connector on the four way I am at a loss. Can't find anything definitive on what should go there. Some pictures show it going to the intake flap actuator. I guess I can look to see if I have one of those and if the vacuum line is missing. Other pictures shows a white connector or cap on there. In honerboys picture you can see this white thing on the left appendage.