[Flojo]

a most common "mistake" many DIYers make, they forget to plug the overflow line, reason of not fully reading the how-to articles...

Originally Posted by DeltaBravo

This line goes through the drivers front fender towards the front and stops just behind and below the front bumper.

Below is the end of that line. I had to plug it with a 3/16 rivet (perfect fit).


After plugging that line, I was able to pressurize the system up to 10psi and bleed the brakes.

I hope this helps the next person that will use the pressure method of bleeding there brake system.

Cheers,