|
I would rather be driving
Join Date: Apr 2000
Location: Austin, TX
Posts: 9,108
|
If the spring plates are bent and do not properly contact the trailing arm then the cam on the adjuster bolts will not properly seat into the backside. This will prevent them from push/pull on the adjustment range. You can tighten the nut on the adjuster bolt until they just get tight and then make the adjustment. also make sure the toe and camber bolts were not reversed. This is not easy but can happen.
__________________
Jamie - I can explain it to you. But I can not understand it for you.
71 911T SWT - Sun and Fun Mobile
72 911T project car. "Minne" - A tangy version of tangerine #projectminne
classicautowerks.com - EFI conversion parts and suspension setups. IG Classicautowerks
|