[aaguiar27]

A lot has happened since the last update and so I have lots to share! I have been documenting the build process but have not gotten around to updating this thread in quite a while. So here goes!

After epoxy it was time to start body work as at the time I planned on painting it myself or at least doing the prep work. Unfortunately I did not take many pictures of this dirty process but I can say it took filler in about 2 low spots on the quarter panels and a few minor lows on the door panels. This was followed by 2 coats of feather fill around the whole car to block down the car as straight as possible. After all that, a final coat of SPI epoxy to seal the body work and any metal exposed from blocking.