Quote:
Originally Posted by et cetera
How could you tell the seal was bad? I literally just had the thing rebuilt, so I'd hope its not that.
It seems to be functioning fine and travels through its whole range of motion without problems. The pin moves all the way back as soon as you release the pressure from the pedal.
|
I chased this problem and did everything including rebuilding the booster and the problem continued. I had a mechanic friend who kept insisting that the booster was bad so Finally i replaced it with a used one and instantly my problem was gone. You may have another issue but many problems are from what was just touched.
One thing you may want to do first is remover the bolt under the dash that goes to the master cylinder and see if your problem disappears.