Quote:
Originally Posted by pmax
Check the ground #9 , power #12 , bypass #12 to #4 etc etc
|
What do you mean "check the ground #9" ?
I have a male pin on my relay box that says 9.
I also have a female #9 hole in the harness.
Which one are you referring to?
I have a MM.
Can you tell me EXACTLY where to connect the red and black lead?
Same question applies to the other 2 statements
"Power to #12"
"Bypass #12 to #4"
Can you tell me EXACTLY where to connect the red and black lead?
Here is more from another thread:
Quote:
Pull the relay out.
Check pin 30 for power. Bypass 30 to pin 87 using a wire, the motor should run if it's ok. If not, trace the connectors from the blower, make sure it's plugged in.
The lever switch grounds pin 85 activating the relay. 86 is power.
Check the middle fuse too.
__________________
|