[smokintr6]

2.7 turbo engine package $5,900:
I’ve had some life changes recently and I’m not going to be able to complete my 2.7 engine build so I want to offer it here as a package deal first. The heart of the package is a street ported 2.7 head with big valves, 8mm stem conversion and beehive springs. I need to check my records but I think the intake flowed 260 at .500 lift. There is a beautiful set of custom stainless headers . These are complete through the crossover and up pipe. One new set of molnar connecting rods, a set of JE pistons fresh from the coater. I don’t have the piston specs handy, but they are EBS Porsche pistons, and you will need to order rings for them. These pistons will ONLY WORK on iron cylinders, and in a 2.7 configuration. If you want to swap in a 3.0 crankshaft you will need to Source different pistons. The camshaft is a new part, not a regrind. The valve lift is .500” and it’s designed to work with the valve train on the included head.... it won’t work if someone tries to slap it on a stock turbo head. Lastly I’m including a 2.7 engine block that appears in good condition, but it will need to be sleeved. Block has girdle and balance shaft covers. If I have not mentioned something it is not included, but I have some spares of things and I can possibly dig around in my shop and locate additional parts for this build. I have a couple 2.7 crank shafts too if you need one (these are not special in any way that I know of).

I also have a complete 2.7 short block + cylinder head. Will need completely gone through, or converted for turbo use $1,300