[Trackrash]

I recall a thread where the sequence of dissasembly was outlined. Maybe someone can find that.

But, before you start, you may want to pinpoint the exact source of the squeek. A hose with one end held to your ear while someone else pushes the car up and down will work.

If you decide to remove your A arms here is the basic sequence.

Jack up and remove wheels and support on jack stands.

loosen and remove the torsion adjusting screw then pull off the torsion bar end cap.

Remove your sway bar.

Disconnect the ball joint from the bottom of the strut.

Pull out the torsion bars.

Remove the front A arm mounts.