|
A large share of time when I changed my front support was removing the existing under coating. I found three methods worked best for me.
1. Fein type vibrating tool with a scrapper blade or even a wood blade. This worked very well except tight spaces.
2. Heat gun and a putty knife, which you want to ventilate when your doing this because of the fumes.
3. Norton fiber wheel, 3M and others make them. Usually I use to strip in areas after the above methods have been utilized.
All the areas where there are spot weld for the panel assemblies will have to have the undercoating removed to prepare for the pan replacement. I usually strip it back 3" or 4" past where my cut or seam ends.
If you need more info let me know.
Jeff
__________________
Jeff
1982 911SC
1973 TR6
1979 124 Spider
1978 124 Spider
|