|
the reason the fuse panel melted is because the fuse did not make a solid connection to transfer the juice.
It is possible you replaced the fuse with a new part that had thinner pins or the CE panel sockets have gotten spread open.
At this point it would be wise to remove the sockets from the panel and replace them with the identical parts.
OR remove the wires from the rear of the panel and plug them into a fuse holder.
If the fuses you got are thinner then you could also solder the pins and this will make the pins thicker
Use deoxit 100 on all of the connections
__________________
^^^ Stan ^^^ 2019 BMW K1250 GS 2016 HD RK
1988 S4 Auto , Elfenbein Perlglanz, Pearl Gray
1982 5sp Met black and tan sport seats
|