Quote:
Originally Posted by dad911
I would remove that box, a hacksaw blade between the box and wood, and cut the nails.
Then strip the wire, use an 'old work box' and push-in connectors to add new tails.
Easy-peasy, 30 minute (1 beer) job, less than $10.
With the box out, I also suspect a 'gentle yet persuasive' pull on the wire will find another inch or so.
|
^^^ That!
Most electricians will leave a little extra. If you give the wire a gentle tug you might get a bit more to work with.... unless the electrician used a wire staple on the stud the box is mounted to... Then you're shafted. A pair of needle nose pliars should tell the story pretty quickly without removing the box.