Quote:
Originally Posted by rfuerst911sc
Rattle can clear . I am going to watch the weather over the weekend and go from there . This is paint and clear that 98 percent of it will be covered with graphics .
|
Sunday will be fine if you are just wet sanding to remove little dust bunnies and providing a good base for mechanical adhesion of the graphics. I would use 1,500 and I would use dish washing soap in the water so there is no grabbing. You probably did not lay enough paint down to do a 600/1,000/1,500 sanding process with machine polishing like you could with a hardened two part clear.
Do not beat on the areas that will be exposed and hand polish those after graphics are applied. I don't think you should use a machine.