|
Registered
Join Date: Jun 2014
Location: Sydney Australia
Posts: 28
|
Cook & Dunning,-----JFP is absolutely correct. The ONLY foolproof way of ascertaining whether your car has the large or small IMS bearing is to pull the flywheel off and have a look. If your IMS bearing cap has the 13mm centre bolt as opposed to the larger 22mm variety, then you are good to go.
I had already determined my clutch needed replacing so there was little extra effort involved,-----after pulling the engine/gearbox out of the car----in removing the flywheel to check the size of the bearing contained within.
|