Quote:
Originally Posted by Flat6pac
The described halfshafts that are covered on the ends are used on mid 86 on. The hubs are 10mm bolts, not 8mm as your pre 86 uses.
With the open halfshafts there is impregnated paper gaskets that go in between the cv and the hubs. Be sure to retorque the bolts after a few miles as the gaskets change and the bolts loosen.
Don’t want to be down the road and have a halfshafts separate.
Bruce
|
👍🏾👍🏾 I do not know whether to feel Good or Bad! Bad that I cannot use them or Good that I do not need to look Farther.
Maybe one day “They” will make them for the earlier Cars with the 8 mm Bolts. Thank you “Again”. I plan to post a thread showing what I am doing soon. I have it on FB, but maybe here is a Better place where it is understood AND Someone (a Lot Of People) Know more than me!