|
Registered
Join Date: Oct 2001
Location: Momence, IL 60954
Posts: 1,918
|
Quote:
Originally Posted by Jeff Alton
2006 997 IMSB replacement = engine disassembly. With the big bearing in your motor you really have nothing to worry about IMSB wise.
When you go in there it certainly makes sense to replace both seals (RMS and IMSB seal) at the same time.
Cheers
|
I'll just add that while resealing the IMS flange, you should also pull the grease seal off the front of the IMS. Takes seconds at that point:
MY06-08 – IMS Retrofit
__________________
Charles Navarro
President, LN Engineering and Bilt Racing Service
http://www.LNengineering.com
Home of Nickies, IMS Retrofit, and IMS Solution
|