Quote:
Originally Posted by jcommin
If you have an N/A, get a pair of 951 sway bars and new bushings. You can find them used. Pass on the coil overs - a set on Koni adjustable will do just fine. And if you have extra money - you could get a pair of Weltmeister springs but you will need an alignment. You could also lower the rear ( I would do it the same time if/when you change the front springs).
And of course a good handling car needs brakes and tires.there are brakes and tires.
This is assuming your front bushings, top mounts and ball joints are in good shape.
|
Great thanks for the advice. For the back, would you recommend I purchase the 30mm torsion bar or just reindex the one I have in combination with higher dampening from the koni adjustables?
Sent from my LGUS997 using Pelican Parts Forums